1
|
F210 Honda tiller
Tines close-up
A rotary tiller, also known as a Rotavator, rotary hoe, power tiller, or rotary plough (in US: plow), is a motorised cultivator that works the soil by means of rotating tines or blades. Rotary tillers are either self propelled or drawn as an attachment behind either a two-wheel tractor or four-wheel tractor. For two-wheel tractors they are rigidly fixed and powered via couplings to the tractors\' transmission. For four-wheel tractors they are attached by means of a three-point hitch and driven by a Power Take-Off (PTO).
Contents |
The powered rotary hoe was invented by Arthur Clifford Howard who, in 1912, began experimenting with rotary tillage on his father\'s farm at Gilgandra, New South Wales, Australia. Initially using his father\'s steam tractor engine as a power source, he found that ground could be mechanically tilled without soil-packing occurring, as was the case with normal ploughing. His earliest designs threw the tilled soil sideways, until he improved his invention by designing an L-shaped blade mounted on widely spaced flanges fixed to a small-diameter rotor. With fellow apprentice Everard McCleary, he established a company to make his machine, but plans were interrupted by World War I. In 1919 Howard returned to Australia and resumed his design work, patenting a design with 5 rotary hoe cultivator blades and an internal combustion engine, in 1920.Langmore, Diane (1983). Howard, Arthur Clifford (1893 - 1971) (HTML). Australian Dictionary of Biography - Online Edition. Australian National University. Retrieved on 2007-07-12.
In March 1922 Howard formed the company Austral Auto Cultivators Pty Ltd, which later became known as Howard Auto Cultivators. It was based in Northmead, a suburb of Sydney, from 1927.Langmore, Diane (1983). Howard, Arthur Clifford (1893 - 1971) (HTML). Australian Dictionary of Biography - Online Edition. Australian National University. Retrieved on 2007-07-12. Finding it increasingly difficult to meet a growing worldwide demand, Howard travelled to the United Kingdom, founding the company Rotary Hoes Ltd in East Horndon, Essex, in July 1938.The Howard Rotavator (HTML) (2007-02-03). Retrieved on 2007-07-12. Branches of this new company subsequently opened in the United States of America, South Africa, Germany, France, Italy, Spain, Brazil, Malaysia, Australia and New Zealand. It later became the holding company for Howard Rotavator Co. Ltd.Langmore, Diane (1983). Howard, Arthur Clifford (1893 - 1971) (HTML). Australian Dictionary of Biography - Online Edition. Australian National University. Retrieved on 2007-07-12. The Howard Group of companies was acquired by the Danish Thrige Agro Group in 1985, and in December 2000 the Howard Group became a member of Kongskilde Industries of Soroe, Denmark.Machinery Manufacturers - Secondary Tillage (HTML). Worldwide Agricultural Machinery and Equipment Directory (2006-11-14). Retrieved on 2007-07-12.
A small rotary hoe for domestic gardens was known by the trademark Rototiller and another, made by the Howard Group who produced a range of rotary tillers, was known as the Rotavator.
Rotary tillers are popular with home gardeners who want large vegetable gardens. The garden may be tilled a few times before planting each crop. Rotary tillers may be rented from tool rental centers for single-use applications, such as when planting grass.
The small rototiller is typically propelled forward (via 1-5 horsepower petrol engine or .8 - 3.5 kilowatts) by the rotating tines and do not have powered wheels, though they may have small transport/level control wheel(s). To keep the machine from moving forward too fast, an adjustable tine is usually fixed just behind the blades so that through friction with deeper un-tilled soil, it acts as a brake, slowing the machine and allowing it to pulverize the soils. The slower a rototiller moves forward, the more soil tilth can be obtained. The operator can control the amount of friction/braking action by raising and lowering the handlebars of the tiller. Rototillers do not have a reverse as such backwards movement towards the operator could cause serious injury. While operating the rototiller can be pulled backwards to go over areas that were not pulverized enough, but care must be taken to ensure that the operator does not stumble and pull the rototiller on top of themselves. Rototilling is much faster than manual tilling, but notoriously difficult to handle and exhausting work, especially in the heavier and higher horse power models. If the rototiller\'s blades catch on unseen sub-surface objects, such as tree roots and buried garbage, it can cause the rototiller to abruptly and violently move in any direction.
Unlike the Rototiller, the self propelled Howard Rotavator is equipped with a gearbox and driven forward, or held back, by its wheels. The gearbox enables the forward speed to be adjusted while the rotational speed of the tines remains constant which enables the operator to easily regulate the extent to which soil is engaged. For a two-wheel tractor rotavator this greatly reduces the workload of the operator as compared to a rototiller. These rotavators are generally more heavy duty, come in higher horsepower (4-18 horsepower or 3-13 kilowatts) with either petrol or diesel engines and can cover much more area per hour.
The trademarked word "Rotavator" is one of the longest palindromes in the English language.
Two-wheel tractor The higher horsepower "riding" rotavators cross out of the home garden category into farming category especially in Asia, Africa and South America, capable of preparing 1 hectare of land in 8 - 10 hours. These are also known as power tillers, walking tractors or two-wheel tractors. Years before they were considered only useful for rice growing areas, where they were fitted with steel cage-wheels for traction, but now the same are being used in both wetland and dryland farming all over the world. Compact, powerful and most importantly inexpensive, these agricultural rotary tillers are providing alternatives to four-wheel tractors and in the small farmers fields in developing countries are more economical than four-wheel tractors.
A rotary tiller for agriculture
Four-wheel tractor Four-wheel tractor-drawn rotary tillers are attached to a three point linkage and are driven by a power take off shaft. Generally considered a secondary tillage implement the can and are commonly used for primary tillage. The also can also be used for inter-cultivation between and for cultivation between rows of vines, etc.
Wikimedia Commons has media related to:
This article is licensed under the GNU Free Documentation License. It uses material from Wikipedia